A & D Technology Inc.

AD5430-01 Universal A/D

The Universal A/D board has 16 channels of single-ended inputs, each with 16-bit resolution. It is capable of continuous data sampling with FIFO or ring buffer for 256KB of data.

Features:

  • Number of input channels: 16
  • Sampling: 100kHz max. (one channel in use) - 5 kHz max (16 channels in use)
  • Input ranges: +-1V, +-6V, +-12V, 0-1V, 0-6V, 0-12V
  • Input impedance: 1MO or above
  • Insulation: Inter-channel non-insulated; inter-CPU-bus insulated
  • Accuracy: +-0.1% FS at each range

AD5430-02A Universal D/A

The Universal D/A board has 8 channels of single-ended voltage outputs, each with 12-bit resolution.

Features:

  • Number of output channels: 8
  • Wave form output function: Continuous analog output (4 channels) of data stored in internal memory
  • Resistance simulation voltage output: Voltage output corresponding to sensors with resistance change such as thermistor.
  • Conversion speed: 10μs/ch (100kHz)
  • Output range: +-1V, +-5V, +-10V, 0-1V, 0-5V, 0-10V
  • Accuracy: +-0.1% FS at each range

AD5430-03 Digital I/O

The Digital I/O board has 32 insulated photo coupler inputs and 32 insulated open collector outputs.

Features:

  • Number of input channels: 32
  • Input format: Current-steering input with photo coupler insulation (current sink type). Negative theory: When "L" is input, CPU receives data "H".
  • Input voltage: 12~24V +- 15%
  • Number of output channels: 32
  • Output Format: Open collector output with photo coupler insulation (current-sink type). Negative theory: When CPU writes "H", "L" is output.
  • Maximum Load current: 100mA (per point)
  • Response time: 1msec or less

AD5430-06 Auto I/O

The Auto I/O board is equipped with functions commonly used for automotive measurement and control, including CAN, PWM output, frequency and duty cycle measurement, and serial communication. This board requires two slots in the ADX chassis.

Features:

  • CAN Communication:
    • Number of channels: 2
    • Standards: ISO 11898
    • Communication speed: 1MHz max
  • Serial Communication:
    • Number of channels: 5
    • Signaling bit rate: 38400 bps maximum
    • Full duplex communication
  • PWM Interface:
    • Number of channels: 8 input, 8 output
    • Input/Output voltage: TTL level

AD5430-07 Thermocouple

The Thermocouple board measures eight channels of K, T, and J-type thermocouples, and includes cold junction compensation. Measurement speed is 250msec (8 channels at 4 measurements/sec). This board requires two slots in the ADX chassis.

Features:

  • Input: Thermocouple (K, J, T) or voltage (+-200mV, +-20V, +-20V)
  • Measurement range:
    • K: -200-1370ºC
    • T: -200-800ºC
    • J: -200-1100ºC
    • +-00mV: -200-200mV, +-2V: -2-2V, +-20V: -20-20V

AD5430-11 Six-axis Motor Control with Encoder Input

The Six-axis Motor Control board is intended for use with stepper motors and servomotors with encoder feedback. The board can control up to six motors simultaneously, and has two pulse outputs per axis for motion and directional control.

Features:

  • Maximum count: 32-bits per axis
  • Response frequency: 1.25 MHz max. (5MHz for quadrature decoding)
  • Output speed range: 0-2,000,000PPS
  • Output logic: Can be switched between positive/negative logic

AD5430-12A Timing Detection Board

The Timing Detection board generates ignition and fuel injection pulses based on engine crank angle position. ADX models can be driven with this board's timing signal as a master clock to synchronize algorithms on an event basis instead of a time basis.

Features:

  • Input:
    • Crank angle signal via encoder, missing tooth or chasing tooth VRS sensor.
    • Cylinder recognition pulse input, TDC position pulse input.
    • 4 channels of phase differential measurement for event timing and synchronization of auxiliary inputs.
  • Output:
    • 16 function pulse output signals for ignition and injection. Up to 20 injections per cylinder event.
    • Timing pulse output synchronization signal.
    • Measurement gate pulse output signal for analog measurement synchronization.

AD5430-13 PWM I/O

The PWM I/O board is a multi-channel, TTL-level, pulse width modulated signal measurement and generation option for the ADX. This card can also measure the frequency of an AC (zero-crossing) input signal.

Features:

  • PWM output: 14 channels
    • TTL output, frequency range of 0.1-20kHz
  • PWM input: 14 channels
    • TTL input, measurement frequency 0.1-20kHz
    • Frequency and duty cycle measurement, or ON/OFF time measurement and edge count mode
  • AC input: 5 channels

AD5430-17 Portable Network

The Portable Network is a communication board equipped with multiple network protocols, including CAN, Serial, K-Line, and LIN.

Features:

  • CAN: 4 channels
    • SJA1000 control function
    • Baud rate: 5k-1Mbps. Individual channel settings available
    • HighSpeedCAN or SingleWireCAN (factory setting)
  • CAN CCP communication: 1 channel
    • SJA1000 control function
    • Baud rate: 5k-1Mbps
  • Serial Communication: 4 channels
    • RS-232C, RS-422/485 (half duplex), RS-422/485 (full duplex), selectable from TTL with software
    • Baud rate: 5k-1Mbps. Individual channel settings available
  • K-Line: 1 channel
    • Baud rate: 5-10.4 kbps
    • TX direct control with resistor value
  • LIN Communication: 4 channels (not yet released)
    • Baud rate: 5-20kbps
    • Master/Slave can be selected with software
    • Error information hardware support (bit error, parity error, slave response timeout, bus activity error)

AD5430-18 Vehicle PWM

The Vehicle PWM card is a three-phase PWM motor control board accepting resolver feedback. This board also includes four analog differential inputs with a maximum sampling frequency of 40kHz.

Features:

  • Resolver Input:
    • R/D converter: AU6802NI Resolver/Digital conversion IC (Tamagawa Seiki Co., Ltd. Manufacturing)
    • Transformation ratio: 0.286 or 0.5
    • Output impedance: 10O or lower
    • Output excitation signal: 10kHz/20kHz. 20Vp-p
    • Maximum angular speed: 240,000rpm
    • (Please check the specifications of the resolver in use. Transformation ratio, output impedance and output excitation signal depend on the resolver.)
  • Analog Input:
    • Number of input channels: 4
    • Differential input measurement
    • Input range of +-5V
    • 16-bit resolution
    • Sampling: 40kHz max. Sampling can be synchronized with PWM carrier wave
  • PWM Output:
    • Number of control axes: 6-channel differential output (UH, VH, WH, UL, VL, WL)
    • Output voltage: 0-5V
    • Carrier wave: Chopping wave (20kHz max)

AD5430-20 100kHz, 8 Channel A/D

The AD5430-20 is a high-speed A/D board capable of simultaneously sampling 8 input channels at 100kHz each. The card also accepts a single rotary encoder input (A, B, Z-pulses), and analog signals can be sampled synchronously with this encoder (or other pulse/trigger) input.

Features:

  • Analog Input:
    • Number of channels: 8 (single-ended input)
    • Input range: +-2V, +-10V
    • Resolution: 16-bit
    • Sampling frequency: 1-100kHz
    • D/C accuracy: +-0.1% of range.
  • Rotary encoder, external trigger, external clock, gate pulse input
    • Number of channels: 3 (A, B, Z)
    • A/D sampling trigger: can be switched with software among Z phase/external trigger, A phase/external clock pulse, and B phase/gate measurement pulse
    • Input voltage: High level of 3.5-5V. Low level of 0-1.25V

[ back to top ]